俄罗斯一级婬片AAAAA片,久久综合欧美日韩

Advanced LDI solutions manufacturer

LDI laser digital imaging technology, data files are directly read by DPX, converted into images, and laser beams are transmitted to plates through DMD and lens, which are applied to carrier plates, soft plates, HDI plates, multilayer plates, fine analytical quality, optimized technology, and efficient industry solutions.

Advantages

○ Eliminate the mask processes.

○ Save time and cost of loading and unloading masks.

○ Reduce the deviation caused by the expansion and contraction of masks. High image resolution and high yield.

High-precision

Minimum resolution1.2μm， Minimum line width25μm（Depending on the configuration）

Regulus 15.0kV 9.3mmx500 LM(L)

Regulus 15.0kV 9.3mm

Regulus 15.0kV 9.3mmx500 LM(L)

Regulus 15.0kV 9.3mm x250 LM(L)

Function

Multiple options for expansion and contraction function

1.automatic expansion and contraction function

2. fixed expansion function:
Exposure based on the fixed expansion values provided

3. measurement function:
The actual measurement of the plate select the actual plate expansion value for exposure Job description: can set the number of plates to be measured, after measuring the plate to take The average value is exposed.

Super-long optical focal depth and light source power monitoring function:

Ultra-long focal depth ±300μm;
Real-time monitoring and dynamic adjustment of laser energy during work

Tracing back

Application

PCB、HDI、FPC (inner layer,outer layer,anti-welding)

Specification/model	DPX45
Application	PCB、HDI、FPC (inner layer,outer layer,anti-welding)
Resolution (mass production)	45um
Capacity 20”×24”@12-18mj/cm2 20”×24”@90mj/cm2	30S 35S
Production size	Min:10”x 10”, Max:24”x 28”
Exposure Size	Max：24”×28”
Panel thickness	0.05mm-3.5mm
Exposure Mode	Single-sided exposure
Alignment Mode	Hole Alignmet,I-mark Alignment
Alignment capability	Outer layer±12um；Inner laye±24um
Line width tolerance	±10%
Deviation increase and decrease mode	Fixed increase and contraction, automatic increase and contraction, interval increase and contraction, partition alignment
Laser type	LD Laser，405±5nm
File format	Gerber 274X；ODB++
Equipment size (length × width × height)	2500mm×1150mm×1900mm
Power	380V three-phase alternating current, 6.4kW,50HZ, voltage fluctuation range + 7% ~-10%
Condition	Yellow light room; Temperature 22°C ± 1°C; Humidity 50% ± 5%; Cleanliness level 10000 and above; Vibration requirements to avoid violent vibration near the equipment
Equipment net weight	2.3T